Forum where anything UOX3-related goes - including, but not limited to: newbie-support, ideas, general questions, comments, etc and-so-forth.
Hoppertje
UOX3 Newbie
Posts: 2 Joined: Sat Dec 10, 2011 4:18 pm
Has thanked:
0
Been thanked:
0
Post
by Hoppertje » Sat Dec 10, 2011 5:28 pm
Hi there!
I installed UOX(UOX3 0.98-4.0) locally and linked it to a fresh copy of UO(UO_setup-1.46.0.3.exe)
Had some trouble logging in, as the client kept disconnecting, but for some reason it is working now...
Now my next problem is, whenever i try to move something to the GM's backpack or create an item with ADD the client disconnects...
I must be doing something horrible wrong.... any suggestions?!
Xuri
Site Admin
Posts: 3704 Joined: Mon Jun 02, 2003 9:11 am
Location: Norway
Has thanked:
48 times
Been thanked:
8 times
Contact:
Post
by Xuri » Sat Dec 10, 2011 8:10 pm
Just to not leave this post unanswered: From the discussion me and Hoppertje had in IRC, and the testing based on that, it seems like using Razor with client versions above 6.0.10.x can cause these issues in UOX3 :/
-= Ho Eyo He Hum =-
Xuri
Site Admin
Posts: 3704 Joined: Mon Jun 02, 2003 9:11 am
Location: Norway
Has thanked:
48 times
Been thanked:
8 times
Contact:
Post
by Xuri » Sun Dec 11, 2011 12:35 am
For anyone else who runs into this issue, try disabling one or both of the following Razor-settings to see if it changes anything:
'Auto-Queue Object Delay actions'-setting
'Use Smart CPU usage reduction'-setting
-= Ho Eyo He Hum =-
dragon slayer
UOX3 Guru
Posts: 776 Joined: Thu Dec 21, 2006 7:37 am
Has thanked:
4 times
Been thanked:
26 times
Post
by dragon slayer » Sun Dec 11, 2011 2:05 am
Razor causes a lot of client problems because way the got it setup to hack the client to add there own features. Only thing the really update on razor is client support since the owner that made it disabandon the project to leave UO
Tom
UOX3 Neophyte
Posts: 31 Joined: Tue Dec 20, 2011 9:36 pm
Location: Berkeley
Has thanked:
0
Been thanked:
0
Post
by Tom » Tue Dec 20, 2011 10:23 pm
Which client and encryption should I use?
dragon slayer
UOX3 Guru
Posts: 776 Joined: Thu Dec 21, 2006 7:37 am
Has thanked:
4 times
Been thanked:
26 times
Post
by dragon slayer » Tue Dec 20, 2011 10:38 pm
i would say use client version 6.0.1.0 and up to 6.0.10.0 best versions out for uox3 at this moment.
make sure you grab the lastets uox3 build from this board.
maybe one day front page will be updated to reflect 2011 LOL